Setting Use Notes
ProjectorFunctions menu
3D On/Off Turns the DLPLinktechnology 3D
featureon or off.
Thedefault is off.
3D Format Displays the current3D format
(InterleavedorU nder-over).
Interleavedbreaks down the image
framefor each eye, alternately
displayinga line of visual information
fromeach frame.
Under-overconcurrentlydisplays
horizontallystretched image framesf or
eacheye, one above the other.
3D Invert
Left-Right
Selects the 3D Invert setting (L-R or
R-L).
L-R displaysvis ualdata for the left eye
first.
R-L displays visual dataf ort heright
eyef irst.
AutoS ignalDetect Enables ordisables signal searching of
inputconnectors.
Thedefault is off.
Select Onto have the projector
continuouslyswi tch inputs until it finds
anactiv e videosource.
Select Offto maintain signal detection
inone input.
LampReminder Turnsthe lamp replacementreminder
onor off.
This reminderappears100 hours
beforethe recommendedlamp
replacement.
LampMode Adjusts lamp brightnessto Standard
orEconomy.
Standarddisplays a high-quality,
brightimage.
Economyincreases the lamp life by
decreasingthe brightnessof t heimage.
AutoP owerOff
(minutes)
Sets the lengthof t heauto power-off
countdowntimer between 1 and240
minutes.
Thedefault is 120 minutes.
Thetimer begins to count down when
theprojector no longerreceives a video
signal.The timer finishes when the
projectorenters Standby mode.
Select 0tot urnoff t het imer.
Zoom Adjusts the zoom to the center of the
imagein or out from 0 to 30.
Thedefault is 0.
Zoomingin cuts off the outeredges of
thes ourcevideo.
ProjectorID Sets the projector’sunique ID number
(from0 to 99) within your organization’s
network.
Youcan refer to this number when
usingthe network remote management
feature(see Remotely managingyour
system througha network interface on
page57).
CH A P T E R 3
Usingyour interactive whiteboard system
16