Setting Use Notes
Networkmenu
Network andVGA
Out
Activates the projector’s VGAOutand
RJ45 connectorand network features.
Status Displaysthe current network status
(Connected,Disconnectedor Off).
Thedefault is off.
DHCP Displaysthe st atus of the network’s
Dynamic Host ConfigurationProtocol
(DHCP) as On or Off.
Thedefault is on.
Onenables a DHCP server ont he
networkto automatically assign an IP
addressto the projector.
Offenables an administratorto assign
anIP address manually.
Password
Reminder
E-mailst henetwork password to the
predefinede-mailrecipient.
SeeW ebpage management on page
57to s et up a destinatione-mail
address.
IP Address D isplays the projector’sc urrentIP
addressin values between 0.0.0.0 and
255.255.255.255.
Toc hangethe projector’sI P address,
uset heR S-232connector (see
Network controls on page76) or use a
DHCP server to assign a dynamic IP
address,and then set a static I P
addressusing the networkremote
management feature(see Remotely
managingyours ystem througha
networkinterface on page 57).
SubnetMask Displays the projector’s subnetmask
numberin values between0.0.0.0 and
255.255.255.255.
Gateway D isplays the projector’sdefault
networkgateway in values between
0.0.0.0and 255.255.255.255.
DNS Displays the projector’s primary
domainname numberin values
between0.0.0.0 and 255.255.255.255.
MAC Address Displays theprojector’s MAC address
inx x-xx-xx-xx-xx-xx format.
GroupName Displays the projector’sw orkgroup
nameas set by an administrator
(maximum12 characters).
Youcan set the projector’sw orkgroup
nameusing the remotemanagement
features(see Remotely managingyour
system througha network interface on
page57 and Remotely managingyour
system throughan RS-232 serial
interface onpage 67).
CH A P T E R 3
Usingyour interactive whiteboard system
19