USB Control settings
This menuallows you to ass ociatea v ideosource with a U SB receptacleon the ECP.
Submenu setting Description
USB1 Source Enablestouch for the selected videosource (VGA-1,VGA-2,HDMI
orDi sabled)by associating the video sourcewi th the roomcomputer
USB receptacle(USB 1)on the ECP.
USB2 Source Enablestouch for the selected videosource (VGA-1,VGA-2,HDMI
orDi sabled)by associating the video sourcewi th the laptopUSB
receptacle(USB2) on the ECP.
Networksettings
This menuallows you to use or not use Dynamic H ost Control Protocol(DH CP) andto s et the
network-relatedaddressesand names whenD HCP is not used.
Submenu setting Description
DHCP Determinesif t heprojector’s IPaddress andother network settings
aredynamically assigned by a DHCPserver or manuallyset.
lOnallows the network’s DHCP server to assign a dynamic IP
addressto the projector.
lOffallows you to manually set the projector’s IP address and
othernetwork settings.
IP Address Displaysor allows you to set theprojector’s IP address inv alues
between0.0.0.0 and 255.255.255.255.
SubnetMask Displays or allows you to s et the projector’ssubnet mask number in
valuesbetween 0.0.0.0 and 255.255.255.255.
Gateway Displays or allows you to set the projector’s default network gateway
inv aluesbetween 0.0.0.0 and 255.255.255.255.
DNS Displays orallows you to set the projector’s IP address for your
network’s primarydomain nameserver in values between 0.0.0.0 and
255.255.255.255.
GroupName Displays or allows you to set the projector’s workgroupname
(maximum12 characters).
ProjectorName Displays or allows you to s et the projector’sname (maximum 12
characters).
Location D isplays or allows you to set the projector’s location (maximum16
characters).
Contact Displays orallows you to set the contact name or numberfor projector
support(maximum 16 characters).
SNMP Turnsthe Simple Network ManagementProtocol (SNMP) agent onor
off.
AP P E N DI X A
Remotelymanaging your systemthrough a network interface
62