lTwo peopleare requiredto mount yourSMAR T productbecause it may be too heavy for one
personto safely maneuver.
Whenyou lift your interactive whiteboard,you and your assistant should standon either side
of the screen,s upportingits weight at the bottom while balancingt het opw ith yourother
hands.
lWhenmounting the projectorboom on a framedor hollow wall, attach both the mounting
bracketand the safety tether to a stud to s afely supportthe projector’s weight. If you use only
drywallanchors, the drywall can fail, resulting in possible personalinjury, and damageto the
productwhich may not be covered by your warranty.
lDo not leavec ableson the floor where they can be a trippinghazard. If you must run a cable
overthe floor, lay it in a flat, st raightline and secure it to the floor with tape or a cable
management strip of a contrasting color. Handlecables carefully and avoid excessive
bending.
CC A U T I O N
lDo not operatethis unit immediately after moving it from a cold location to a warm location.
Whenthe unit is exposedt o such a changein temperature,moisture can condense ont he
lensand crucial internal parts. Allow the system to s tabilize to roomtemperaturebefore
operationto preventpossible damaget o the unit.
lDo not placet heunit in hot locations, such as nearheating equipment.Doing so could cause
amalfunction and shortent helif e of the projector.
lAvoid setting upand using the SMART product in an areawith exc essive levels of dust,
humidityand smoke.
lDo not placey ourSMART productin direct s unlightor near any appliancethat generatesa
strongmagnetic field.
lIf you needto lean the interactive whiteboardagainst a wall before you mounti t, make sure it
remainsin an uprightposition, resting on the pen tray brackets, which can sustain the weight
of the interactivew hiteboard.
Do not rest the interactivew hiteboardon its side or on the top of the frame.
IM P O R T A N T IN F O R M A T I O N
ii