Identifying the parts

Identificación de partes

 

 

About the ID of the Remote Commander

You can avoid having the digital camcorder accidentally respond to signals from other remote commanders by setting the VTR4/ID/ VTR2 switch to ID. Use the supplied Remote Commander when you set the switch to ID. When you use the Remote Commander for the first time, register the ID following the procedure below. Once you have registered the ID, you do not need to do so again.

(1) Open the cover, then press MENU to display the menu in the viewfinder.

(2) Press or to select COMMANDER, then press EXECUTE.

(3) Press or to select ID SET.

(4) Set VTR4/ID/VTR2 on the Remote Commander to ID.

(5) Point the Remote Commander at the Remote Commander sensor on the digital camcorder and press π on the Remote Commander.

After the beep sound, the ID of the Remote Commander is registered, and the COMMANDER is set to ID in the menu system.

(6) Press MENU to erase the menu display.

1

MENU

 

D ZOOM

OFF

MENU

16 : 9 WIDE

 

 

ZEBRA

 

 

COMMANDER

 

 

BEEP

 

 

FRAME REC

 

 

INT REC

 

 

[ MENU ] : END

 

5 STOP

Sobre el código de identificación (ID) del telemando

Usted podrá evitar que la videocámara digital responda accidentalmente a las señales de otros telemandos poniendo el selector VTR4/ID/VTR2 en ID. Utilice el telemando suministrado después de haber puesto el selector en ID. Cuando utilice el telemando por primera vez, registre el ID realizando el procedimiento siguiente. Después de haber registrado el ID, no necesitará volver a hacerlo.

(1) Abra la cubierta y presione MENU para hacer que se visualice el menú en el visor.

(2) Presione o para seleccionar COMMANDER, y después presione

EXECUTE.

(3) Presione o para seleccionar ID SET.

(4) Ponga VTR4/ID/VTR2 del telemando en ID.

(5) Apunte con el telemando hacia el sensor de control remote de la videocámara digital y presione π del telemando.

Después de un pitido, se registrará el ID del telemando, y COMMANDER se ajustará a ID en el sistema de menús.

(6) Presione MENU para borrar la visualización del menú.

2 MENU

COMMANDER VTR4

OFF

ID

ID SET

[ MENU ] : END

3 MENU

COMMANDER VTR4

OFF

ID

ID SET

COMMANDER [ STOP ] : ID SET

4 VTR 4 ID VTR 2

118