Creating a desired picture without changing the exposure

When the aperture value is F11, the shutter speed is 1/50, and the gain level is 0 dB, adjust the aperture value manually to F4, for example.

When you change the aperture, shutter speed or gain level by 1 step, the exposure changes by 1.0 EV for shutter speed and 0.5 EV for aperture and gain.

If you change the aperture value from F11 to F4 in the above example, the exposure from aperture control becomes brighter by 6 steps (+3 EV). Adjust the shutter speed and the gain so that the exposure becomes darker by –3 EV to not change the total exposure.

Example 1: changing only the shutter speed

To reduce the exposure by –3 EV using the shutter speed, you should increase the speed 3 steps. Change the shutter speed from 1/50 to 1/ 425 (1).

Example 2: setting the shutter speed to 1/1000 and changing the gain level

When the shutter speed is changed from 1/50 to 1/1000 the EV from the shutter speed control changes to –4 EV. To maintain total exposure, +1 EV (2 steps) should be added by increasing the gain level. Change the gain level from 0 dB to +6 dB (2). Note that when you set the gain level higher, the picture may be distorted.

Notes on manual adjustment

•When recording outdoors, the brightness of a subject may be affected by weather.

•When recording conditions change, we recommend that you reset each item.

Creación de la imagen deseada sin cambiar la exposición

Cuando el valor de apertura sea F11, la velocidad de obturación 1/50, y el nivel de ganancia 0 dB, ajuste manualmente el valor de apertura a F4, por ejemplo.

Cuando cambie la apertura, la velocidad de obturación, o el nivel de ganancia 1 paso, la exposición cambiará 1,0 EV para la velocidad de obturación, y 0,5 EV para la apertura y la ganancia.

Si cambia el valor de apertura de F11 a F4 en el ejemplo anterior, la exposición desde el control de apertura será 6 pasos (+3 EV) más brillante. Ajuste la velocidad de obturación y la ganancia de forma que la exposición se vuelva –3 EV más obscura a fin de no cambiar la exposición total.

Ejemplo 1: Cambio de la velocidad de obturación solamente

Para reducir la exposición –3 EV utilizando la velocidad de exposición, tendrá que aumentar la velocidad 3 pasos. Cambie la velocidad de exposición de 1/50 a 1/425 (1).

Ejemplo 2: Ajuste de la velocidad de exposición a 1/1000 y cambio del nivel de ganancia

Cuando cambie la velocidad de exposición de 1/ 50 a 1/1000, el EV desde el control de velocidad de obturación cambiará a –4 EV. Para mantener la exposición total, habrá que añadir +1 EV (2 pasos) aumentando el nivel de ganancia. Cambie el nivel de ganancia de 0 dB a +6 dB (2). Tenga en cuanta que cuando aumente el nivel de ganancia, es posible que se distorsionen las imágenes.

Notas sobre el ajuste manual

•Cuando videofilme en exteriores, el brillo del motivo puede verse afectado por el tiempo atmosférico.

•Cuando cambien las condiciones de videofilmación, le recomendamos que reajuste cada ítem.

avanzadas Operaciones operations Advanced

59