There are four on-chip memory controllers that interface directly to FB-DIMM memory and include eight FB-DIMM slots (one per channel, or two per memory controller). In addition, there are an on-chip PCI-Express I/O interface and two

10-Gb Ethernet ports. The UltraSPARC T2 processor is a highly integrated processor that implements the 64-bit SPARC V9 architecture.

5.1.2I/O

All I/O is provided via the UltraSPARC T2 PCI-Express interface. A PLX switch provides the PCI-E interfaces. Dual Intel NICs (or network adapters) supply the two Ethernet interfaces to the front panel and the ARTM for management interfaces.

5.1.3Base and Fabric Interfaces

The Base interface extends from the Intel 82571 NIC connected to the PCI-E switch via a x4 connection. The PCI-E switch then connects to the Power PC and to the Base interface.

The Fabric interface uses the processor’s XAUI interface and connects to the midplane fabric interface.

5.1.4Additional I/O

The additional I/O includes:

RS-232 Serial Port

IDE port for Compact Flash card

Dual USB ports

A PCI-E-to-PCI bridge provides an on-board local PCI bus to a PCI-to-USB device that provides the USB ports. Two USB ports connect to the front panel and one USB port connects to an USB-to-IDE bridge. The USB-to-IDE bridge supplies the IDE interface for the Compact Flash.

5.1.5Power PC

The RMII port on the Power PC connects to the Base interface through an Ethernet switch.

Chapter 5 Hardware Functional Descriptions

5-3

Page 103
Image 103
Sun Microsystems CP3260 manual 2 I/O, Base and Fabric Interfaces, Additional I/O, Power PC