Sun Microsystems CP3260 manual Installing an Advanced Rear Transition Module Optional

Figure Legend

1TOD battery location

2Remove this FB-DIMM for access to battery

3TOD clock battery location with FB-DIMM removed

2.6Installing an Advanced Rear Transition Module (Optional)

For rear I/O access, a compatible RTM must be used with the Netra CP3260 blade server.

Note – If you are using a Netra CP32x0 ARTM, refer to the appropriate Netra CP32x0 ARTM User’s Guide for specific installation instructions.

In general, install the RTM from the rear of the server. Look at the front of the server and locate the slot number where the Netra CP3260 blade server is installed. Then go to the back of the server and install the RTM in that particular slot.

2-18Netra CP3260 Blade Server User’s Guide • April 2009