Sun Microsystems CP3260 manual Determining Local Network IP Addresses and Host Names

■time_zone = US/Pacific

■locale = en_US

■name_service = NIS

■name_server = nameserver_host

■\ (backslash) is a line continuation character indicating that the command is continued on the next line.

You must type your superuser password again after typing this command. The installation process should take roughly 5 minutes per client and about 15-30 minutes for the operating environment service to install; however, no progress is displayed on screen while the process is running. Do not cancel or kill the process until the process has successfully completed.

You should see messages similar to the following after a few minutes, confirming that the command went through successfully the second time:

Login to client_host as user root was successful.

Download of com.sun.admin.osservermgr.cli.OsServerMgrCli from client_host was successful.

6. Boot the diskless client.

3.3.3Determining Local Network IP Addresses and Host Names

Collect the following information to connect hosts to the local area network (LAN). Ask your network administrator for help, if necessary. You can use TABLE 3-1to record this information. This information is not needed for a standalone installation.

TABLE 3-1Local Network Information

Information Needed Your Information

IP address* and host name for each Sun

Netra CP3260 client

Domain name

Type of name service and corresponding name server names and IP addresses—for example, DNS and NIS (or NIS+)

Subnet mask

Chapter 3 Software Installation 3-7