Introduction | Sun Microsystems CP3260 instruction

FeatureDescription

PICMG compliance

Node board support

Operating system

Internal I/O (connections to

ATCA midplane)

External I/O

•Single-wide ATCA module

•ATCA 8U form factor

•Single-wide ATCA module

•6-HP slot width

•PICMG 3.0 R1.0

•PICMG 3.1 R1.0

Functions as a CPU node board with the Solaris operating system and software packages

Solaris 10 8/07 OS and subsequent compatible versions with supported Netra patches

•Dual 10/100/1000BASE-T Ethernet for Base interfaces

•10-Gb XAUI or 1-Gb SERDES Ethernet interfaces as Fabric interfaces

•Dual IPMI channel connects to the midplane for communicating with the Shelf Management card

•One 10/100/1000BASE-T Ethernet maintenance port on front panel

•One asynchronous serial port for console on front panel

•Dual USB 2.0 compliant ports on the front panel

•Rear access available on Netra CP32x0 ARTMs:

– One 10/100/1000BASE-T Ethernet port (RJ-45)

	– One asynchronous serial port (RJ-45)
	Note - With a Netra CP32x0 ARTM installed, both the front panel and
	ARTM serial ports are active. Either serial port can be used; but only one
	of the serial ports can be used at a time.
IPMI system	Uses IPMI communications with baseboard management controller
management	(BMC); performs advanced system monitoring (ASM) on local board
	interface (for example, temperature sense, FRU ID, and control)
Hot-swap	• Board hot-swap support.
support
Front panel	• One 10/100/1000BASE-T Ethernet port (RJ-45)
access I/O	• Dual USB 2.0 compliant ports
	• One serial port (RJ-45)
Rear access	• Common rear transition module (RTM) interface supporting the Sun
interface	Netra CP32X0 ARTMs
Compact Flash	• Compact Flash socket to support a Sun 8-Gbyte or 16-Gbyte user flash
support	type I/II memory card
Building	Network Equipment Building Systems (NEBS) Level 3
compliance
Flash update	Supported from downloaded file

Chapter 1 Introduction

1-3