Sun Microsystems manual Features, 1Netra CP3260 Blade Server Feature Summary

■Elimination of PCI connectivity between the blade servers in the system and reallocation of connectivity to serial interconnects, eliminating single points of failure

■Mandatory use of Intelligent Platform Management Interface (IPMI) management interfaces

■Flexible user I/O

■Power and thermal management guidelines enforced by the management infrastructure

■Separation of control and data traffic by supporting the Base (PICMG 3.0) and Fabric (PICMG 3.1) interfaces

The ATCA standard consists of the PICMG 3.0, PICMG 3.1, PICMG 3.2, and PICMG

3.3 specifications. The Netra CP3260 blade server complies with:

■PICMG 3.0, the base specification that defines the mechanical, power distribution, system management, data transport, and regulatory guidelines

■PICMG 3.1, which builds upon the PICMG 3.0 base specification and the IEEE 802.3-2003 standard

1.2Features

TABLE 1-1provides a summary of Netra CP3260 features.

TABLE 1-1Netra CP3260 Blade Server Feature Summary

Feature	Description
CPU	• One UltraSPARC T2 processor (6 or 8 cores, 8 threads/core)
	• CPU core speed: 1.2 GHz
Memory	• Fully-Buffered DDR2-based memory DIMMs (FB-DIMMs)
	• Eight FB-DIMM slots (one per channel or two per memory controller)
	• 1-Gbyte or 2-Gbyte FB-DIMMs, for a total memory of 16 Gbytes
Service	• Service processor (MPC885) for CPU reset, boot, partition, and fault
processor	management architecture (FMA)
Power	• 200 watts maximum
requirement	• Dual redundant input 48V to derive on-board power
Cooling	• 32 - 35 cfm at 55C
requirement

1-2Netra CP3260 Blade Server User’s Guide • April 2009