Sun Microsystems CP3260 manual string. network-boot-arguments can, use-nvramrc? is true, protocol

TABLE 4-2OpenBoot Configuration Variables

Variable	Possible Values	Default Value	Description
error-reset-recovery	boot, none,	boot	Specifies recovery action after an error reset.
	sync		Default is boot.
			• none – No recovery action.
			• boot – System attempts to boot.
			• sync – Firmware attempts to execute a
			Solaris sync callback routine.
fcode-debug?	true, false	false	If true, include name fields for plug-in
			device FCodes.
input-device	keyboard,	virtual-console	Power-on input device.
	virtual-console
load-base	0-n	16384	Address.
local-mac-address?	true, false	true	If true, network drivers use their own
			MAC address, not the server MAC address.
network-boot-arguments	[protocol, ]	none	Arguments to be used by the PROM for
	[key=value, ]		network booting. Defaults to an empty
			string. network-boot-arguments can
			be used to specify the boot protocol
			(RARP/DHCP) to be used and a range of
			system knowledge to be used in the process.
			For further information, see the eeprom
			(1M) man page or your Solaris Reference
			Manual.
nvramrc	variable-name	none	Command script to execute if
			use-nvramrc? is true.
oem-banner?	true, false	false	If true, use custom OEM banner.
oem-logo?	true, false	false	If true, use custom OEM logo; otherwise,
			use Sun logo.
output-device	screen,	virtual-console	Power-on output device.
	virtual-console
screen-#columns	0-n	80	Sets number of columns on screen.
screen-#rows	0-n	34	Sets number of rows on screen.
scsi-initiator-id	0-15	7	SCSI ID of the Serial Attached SCSI
			controller.
security-#badlogins	variable-name	none	Number of incorrect security password
			attempts.
security-mode	none, command,	none	Firmware security level.
	full

Chapter 4 Firmware and Blade Server Management 4-13