Sun Microsystems CP3260 manual Hardware Installation, Equipment and Operator Safety

C H2A-PCT E RHRA P T E

Hardware Installation

This chapter describes the hardware installation procedures for the Netra CP3260 blade server, and contains the following sections:

■Section 2.1, “Equipment and Operator Safety” on page 2-1

■Section 2.2, “Materials and Tools Required” on page 2-3

■Section 2.3, “Preparing for the Installation” on page 2-3

■Section 2.4, “Installation Procedure Summary” on page 2-4

■Section 2.5, “Configuring On-Board Hardware” on page 2-5

■Section 2.6, “Installing an Advanced Rear Transition Module (Optional)” on page 2-18

■Section 2.8, “Connecting External I/O Cables” on page 2-23

2.1Equipment and Operator Safety

Refer to Important Safety Information for Sun Hardware Systems (816-7190) for general safety information.

Read the safety statements specific to the Netra CP3260 blade server carefully before you install or remove any part of the system.

Caution – Depending on the particular chassis design, operations with open equipment enclosures can expose the installer to hazardous voltages with a consequent danger of electric shock. Ensure that line power to the equipment is disconnected during operations that make high voltage conductors accessible.

2-1