Sun Microsystems CP3260 manual Compact Flash Connector, Midplane Power Connector Zone

FIGURE A-4Front Panel Serial Port Diagram

I0I0I

1 2 3 4 5 6 7 8

TABLE A-3shows the serial port connector pin assignments.

TABLE A-3Serial Port RJ-45Connector Pinouts

	Signal			Signal
Pin	Name	Function	Pin	Name	Function
1	RTS	Request To Send	5	GND	Ground
2	DTR	Data Terminal Ready	6	RXD	Receive Data
3	TXD	Transmit Data	7	DSR	Data Set Ready
4	GND	Ground	8	CTS	Clear To Send

A.4.2 Compact Flash Connector

The Compact Flash connector is a type I/II connector.

A.4.3 Midplane Power Connector (Zone 1)

The Netra CP3260 blade server uses a Zone 1 power connector. It provides support for the following signals:

■Two −48 volt DC power feeds (four signals each; eight signals total)

■Two IPMB ports (two signals each, four signals total)

■Geographic address (eight signals)

The analog test and ring voltage pins are left unconnected.

A-6Netra CP3260 Blade Server User’s Guide • April 2009