A-1
1760 SeriesComponent Waveform/Vector Monitor User Manu al
Appendix APerformance Specification
The specificationtables use the following abbreviations.

Performance Requirement (Req).All performance require-

ments in the specificationtables are identified with Req, and can be
assured by completing the Performance Check Procedure (1740A/
1750A/1760--Series Service Manual.) Allow a warm-up time of 20
minutes.
Performance requirements in the electrical spec ifications are valid over an
ambient temperature range of +20°Cto+30°C. ThePerforma nce Re-
quirement tolerances listed in the E lectrical Specification are doubled over
the temperature range of 0°Cto+50°C, unless otherwise specified. Test
equipment used to verify Performance Requireme nts must be calibrated
and workingwithin the limits specified in the Service Manual Equipment
Required List.
Reference Information. Informat ion that amplifies a performance
requirement or is of special im portance is indicated by RI. There is no
need to check these itemsto a specific tolerance.

Reliability

Mean Time Between Failu re (MTBF)
The demonstrated MTBF goal is 40637 hours MTBF at 25°Cambient,
which will be monitoredfrom field failure reports.
Mean Time to Repair (MTTR)
The projected MTTR is 1 hour.