Usingthe Menus
1760 SeriesComponent Waveform/Vector Monitor User Manu al
3-20
Configure Menu
Push the CONFIG button to display the configure menu,
shown in Figure 3-6. Turn the left bezel control to select
INPUT,VECTOR, FORMAT, STANDARD,OFFSET, CALIBRATE,
REMOTE,or REFERENCE (a box appears around the selec-
tion). Following are descriptions of each selection.

INPUT

HCOUPLING —Selects AC or DC coupling for
rear-panel inputs.
HDC RESTORER —Selectsthe clamp speed. Slow
will clamp while displaying any hum.
HCLAMP—Selects the point of the video signal that is
clamped to 0. Can be setfor ST (sync ti p) or BP
(back porch).
VERTPOS HORIZPOS
CLEAR
MENU
Bezel
Buttons
Left Center Right
INPUT
VECTOR
FORMAT
STANDARD
OFFSET
CALIBRATE
REMOTE
REFERENCE
COUPLING
AC DC
DCRESTORER
SLOW FAST
CLAMP
ST BP
A123
COMPOSITE
COMPONENT
B123
COMPOSITE
COMPONENT
Figure 3-6. The CONFIGUREmenu display with INPUT selected.