Usingthe Menus
1760 SeriesComponent Waveform/Vector Monitor User Manu al
3-16
Line Select Menu
Pushing the LIN SEL menu button enables the line select mode
and provides a menu display. The center bezel control is
assigned to select the line number. The following choices
can be made using the bezel buttons that c orrespond to the
on-screen labels:
1760--Series
H1H or 15H (one line or15 lines)
HFIELD —ALL or 1of 2
HNEXT FIELD —(Appears only when 1of 2 FIELD is
selected.) Push the corresponding bezel button to
sequence through the fields designated by the FIELD
selection. A box flashes momentarily around the
on-screen label to verify that the selec tion has been
made.
1760--Series OptionSC
HFIELD —ALL or 1of2 or 1of 4 or 1of8
H1H or 15H (one line or15 lines)
HNEXT FIELD —(Appears only when 1of 2,1of4,or
1of 8 FIELD is selected.) Push the corresponding
bezel button to sequence through the fie lds desig-
natedbytheFIELD selection.
HALT2FIELD—(Appears only when 1of 4 FIELD is
selected.) Push the corresponding bezel button to
toggle between the current field and the secondne xt
field; for example, FIELD 1 andFIEL D3.
HALT4FIELD—(Appears only when 1of 8 FIELD is
selected.) Push the corresponding bezel button to
toggle between the current field and the fourth next
field; for example, FIELD 1 andFIEL D5.