Usingthe Menus
1760 SeriesComponent Waveform/Vector Monitor User Manu al
3-22
Tab l e 3 - 1 .Valid FORMAT select ions.
525/60
625/50
BARS SETUP
FORMAT
GBR
SMPTE / EBU
BETA
MII
GBR
SMPTE / EBU
BETA
MII
••
75% 100%
••
••
••
••
••
••
••
YN
[2]
[3]
75% 100% YN
[1]75% or 100% Bars selected through CONFIG—VECTOR menu.
Setup Yesor No is selected thro ugh the CONFIG—VECTOR
menu. The setup selection is only relevant with525/60 BETA,
andis ignored in all other formats.
[2]
MIIis identical to SMPTE/EBUin 625/50.
[1]
[3]
STANDARD
HCONFIGSTANDARDallows the user to set the cursor
unit of measure to MV,IRE, or AUTO. When AUTO is
selected, cursor units are automatica lly changed to
IRE when operating in the NTSC standard, and MV
when operating in the PAL standard.
HFor dual-standardinstruments, a menu selection of
NTSC,PAL, or AUTO standard is also available.
When AUTO is selected,the operating standard is
changes automatically to matc h the standard of the
displayed input signal. A circled Aprecedes
NTSC or PALon the readout .