Usingthe Menus
1760 SeriesComponent Waveform/Vector Monitor User Manu al 3-23
OFFSETHThe VERTICAL POSITION control normally positions
all channels together. When OFFSET is enabled, the
bezel controls can be used to offset input channels 2
(Aor B)and 3 (Aor B)with respect to channel 1 (Aor
B).
HWhile the offsetsare enabled, the VERTICAL POSI -
TION control willstill position all channels together,
with the offset amount remaining constant. When
OFFSET is turned off, the input channel s will be
re-aligned. The selected offset amount will be
recalled the next time OFFSET is enabled.
HWhen A2A3 OFFSET is on, the center a nd right bezel
controls are assigned to CH A2 and CH A3 offsets.
On-screen labels appear just above each control.
Turningthese controls will offset the CH A2 and CH
A3 signalswith respect to CH A1.When B2B3 offset
is on, the same two controls are assigned to CH B2
and CH B3.
HWhen both A2A3 and B2B3offsets are on, the user
assignsthe controls to either Aor Boffsets. The
CONTROL selection only appears when both Aand B
OFFSETS are selected.
HAn offsetwill remain in effect until the user turns
the offsetOFF. (Exiting the CONFIG menu will not
affect the OFFSET ON / OFF setting.)