
Usingthe Menus
1760 SeriesComponent Waveform/Vector Monitor User Manu al 3-17
When bezel buttons corresponding to NEXT FIELD ,
ALT2FIELD
,or ALT4FIELDare pushed, a box
flashes momentarily around the on-screen label to
verify that the selectionhas been made.
Readout
The line select readout (in the upper left of the CRT) consists
of field followed by line number. When 15H is selected, the
readout also displays the range of line numbers. For exam-
ple, select FIELD 1 and 15H, then rotate the LINESEL c ontrol
to 34. The readout is field 1, l ines 34to 48:
F1 34
F1 48
Line Select Functions
All menus are functional during line select operation. The
line select menu display disappears when another m enu is
selected, but the selectedline and field are displayed until the
line select menu is exited. (The field and line readout re-
mains in the upper left of the screen, and the line select LED
remains lighted to indicate this state.)
LineselectcanalsobeusedwithMULTIPLEdisplays of WAVE-
FORM, VECTOR,andSCH. Selected displays appear on the
screen in the followingorder: WAVEFORM, VECTOR, SCH.
The readout indicates the line number of the highest priority
display. For example: with waveform and vector displays
both selected, a readout of F1:20 would indicate that field 1,
line 20 is displayedin waveform mode, and field 1, line 21 is
displayed in vector mode.
In a waveformdisplay, the selected line is displayed firstin a
two-line sweep,and brightened in a field sweep.
When line select isenabled, the rear-panel PIX MON output
highlights the selected line on the picture monitor display.