STE 58760
Note)
Before exiting the edit function, check that the edited data is correct.
(8)Starting up the controller with the edited file. In order to validate (make effective) the changes, first turn off the main power and then hot start the controller.
Note 1)
Before changing the contents of a file, it is recommended to back up the file with a floppy disk. For details of how to back up a file, see 5.5, "Backing Up Files".
Note 2)
If the contents of the system configuration file were changed for the worse when they were edited, read the CONSTRUC. SYS file from the attached system disk of the controller and conduct the edit operation all over again. For details of how to load the file, see 5.5, "Backing Up Files".
