STE 58760
g)By pressing the [F4] key, the edit data are changed from the position data (POINT/World) to the coordinate data (TRANS) and the load data (PAYLOAD). At that time, select the coordinate data (TRANS). When the coordinate data have been taught to the file, the data are displayed. When the coordinate data have not been taught to the file, message "no exist data" is displayed.
_
no exist data
h)Input a coordinate name to be taught. By using the alphanumeric keys, input a coordinate name to be taught. At that time, the coordinate name being taught is displayed at the bottom of the LCD display.
To change the coordinate data which have been taught, by using the cursor keys [↑] and [↓], select the coordinate name of the coordinate data to be changed. When the coordinate name is selected by using the cursor keys, it is reversely indicated.
i)Teach coordinate data
①In case the coordinate data are input with numeric values.
Input values of axes X, Y, Z, and C following the coordinate name displayed at the bottom of the LCD display.
"TABLE 1 = 10, 20, 30, 45" Coordinate name X Y Z C
