STE 58760
e)When the file name at the bottom of the screen is correct, press the [Exec] key once again. If the file name is incorrect, press the [Bs] key to move the cursor to the field of the file name, correct the file name, and then press the [Exec] key.
At that time, the LCD displays the program of the file. When a new file is specified, "new file is created" appears at the bottom of the screen.
PROGRAM SAMPLE MOVE P1
MOVE P2 END
_
SAMPLE | 1 | 5 | ] |
f)Press the [F1] key on the teach pendant. At that time, the system exits from the edit mode and enters the data editor mode. When position data have been taught to the file, the data are displayed. When the position data have not been taught to the file, "no data exist" is displayed.
_
No exist data
By pressing the [F1] key, the system returns back to the program edit mode.
