User Guide | VersaLink™ Gateway (Model 327W) | |
|
|
|
| Service Name | The NAT service for which you are configuring Port Forwarding. |
| Type | The type of NAT service configuration you selected. |
| Protocol | The type of Protocol that is used to run this NAT service. |
|
| TCP- Transmission Control Protocol. |
|
| |
| Local IP Address | If a static IP address has been assigned, it will be displayed here. |
| Base Host Port | The port on the WAN that will host the NAT service selected. Base Host Port is the |
|
| first port that will be used for a specific service when configured for a range of ports. |
13.3 Port Forwarding Trigger Ports
To select Port Forwarding Trigger Ports, click on define custom service from the Service Configuration screen, and then select Trigger Ports from the Custom Service screen. Click on next. The follow settings will be displayed in the Trigger Ports screen. Enter your values in the Local ‘Trigger’ Port Range fields and click on next to continue.
Service Name | The NAT service you selected. |
Local Trigger Port Range | The local LAN side TCP/UDP port. |
Global Port Range | The WAN side TCP/UDP port range. |
117 | October 2006 |
