Westell Technologies 327W manual Enabling Single Static IP Single IP Address PassThrough

User Guide VersaLink™ Gateway (Model 327W)

12.1.1 Enabling Single Static IP – Single IP Address PassThrough

(Applicable for PPPoE Connections Only)

To enable Single Static IP, select a device that will share your Single Static IP from the options listed in the window. Click on enable.

NOTE: The Single Static IP Configuration screen allows you to select the device on your LAN that will share your Single Static IP.

If you select a device and clicked on enable, the following pop-up screen will appear. Click on OK to enable this device for Single Static IP. Click on Cancel if you do not want to enable Single Static IP.

NOTE: The actual device name may differ from the name displayed in this screen.

030-300500 Rev. A 40 October 2006