Westell Technologies 327W manual Private LAN Configuration Configuring NAT

User Guide VersaLink™ Gateway (Model 327W)

12.5.5 Private LAN Configuration – Configuring NAT

The following settings will be displayed if you select Private LAN from the Advanced LAN menu. (Private LAN is the default configuration for this VersaLink.)

NOTE: Private LAN allows you to set up a network behind VersaLink.

If you change the settings in this screen, click save. If you click reset, the changes will not take effect.

If you made changes and clicked on save, the following pop-up screen will be displayed. Click on OK. This will save your Private LAN Configuration settings. If you click Cancel, your new settings will not take effect.

Private LAN DHCP Server Enable	Default = CHECKED
	If this box is CHECKED, it enables DHCP addresses to be served from
	the Private LAN pool.
Private LAN Enable	Default = CHECKED
	If this box is CHECKED, it enables the addresses from the Private LAN to
	use the NAT interface.
Modem IP Address	Displays VersaLink’s IP address
030-300500 Rev. A	77	October 2006