Westell Technologies 327W Connection Name Account ID Account Password Service Profile Manual

User Guide VersaLink™ Gateway (Model 327W)

Connection Name

Account ID

Account Password

Service Profile

Manual

On Demand

Always On

Time Out Enable

Save Password

Minutes for Connection Time Out

This field allows you to enter a new connection name of your choice (up to 64 characters).

The account ID that you used in section 8 if you are connecting to the same Service Provider. If you have multiple Service Providers, you can enter this information at this time.

The account password that you used in section 8 if you are connecting to the same Service Provider. If you have multiple Service Providers, you can enter this information at this time.

Westell recommends that you use the Default parameter. Factory default = MANUAL

Selecting this feature allows you to manually establish your PPP session. Selecting this feature allows the Gateway to automatically re-establish your PPP session on demand anytime your PC requests Internet activity (for example, browsing the Internet, email, etc.). When you have traffic, it may cause a delay. Selecting this feature allows the Gateway to automatically establish a PPP session when you log on, or if the PPP session goes down.

Factory Default = DISABLED

Selecting this feature allows you to enable the timeout parameter of your PPP session, which is set to a factory default of 20 minutes.

Selecting this feature allows you to save the password for your new connection profile in VersaLink so that you will not have to re-enter it in case of a re-boot. This option allows you to specify the number of minutes that you want a PPP session to stay active before it is disconnected due to inactivity. (This feature works if you have selected the Time Out Enable feature explained above.)

030-300500 Rev. A 36 October 2006