Westell Technologies 327W manual WAN Configuration

User Guide VersaLink™ Gateway (Model 327W)

12.6.2 WAN Configuration

The following settings will be displayed if you select WAN from the Advanced WAN menu. If you change the Bridge Broadcast, Bridge Multicast, or Spanning Tree Protocol configurations in this screen, click on the save filter settings button to allow these changes to take effect. If you change any of the Status configurations, a pop-up screen will prompt you to reset the Gateway. After the Gateway has been reset, the Status configurations will take effect. The edit button allows you to change the VC configuration settings of the Gateway. Details on the edit button are explained later in section 12.6.3.

NOTE: The actual information displayed in this screen may vary, depending on the network connection established.

030-300500 Rev. A 86 October 2006