Westell Technologies 327W manual Warning Message, Check Private LAN DHCP Settings

User Guide		VersaLink™ Gateway (Model 327W)
	Subnet Mask	Displays the Subnet Mask, which determines what portion of an IP
		address is controlled by the network and which portion is controlled by the
		host.
	DHCP Start Address	Displays the first IP address that the DHCP server will provide.
	DHCP End Address	Displays the last IP address that the DHCP server will provide.
	DHCP Lease Time	Displays the amount of time the provided addresses will be valid, after
		which the DHCP client will usually re-submit a request.

NOTE: DHCP Lease Time value must be greater than 10 seconds. The default = 01:00:00:00. Seconds must be between 0 and 59, minutes must be between 0 and 59, and hours must be between 0 and 23.

If the settings you have entered in the Private LAN Configuration screen are incorrect, the following warnings messages may be displayed via pop-up screens. If this occurs, check the settings in the Private LAN Configuration screen.

Warning Message	Check Private LAN DHCP Settings
Start Address is not part of the Subnet	Check the value in the DHCP Start Address field
End Address is not part of the Subnet	Check the value in the DHCP End Address field
End Address is below the Start Address	Check the value in the DHCP End Address field
Lease time must be greater than 10 seconds	Check the values in the DHCP Lease Time fields
Seconds must be between 0 and 59	Check the Seconds value in the DHCP Lease Time field
Minutes must be between 0 and 59	Check the Minutes value in the DHCP Lease Time field
Hours must be between 0 and 23	Check the Hours value in the DHCP Lease Time field

030-300500 Rev. A 78 October 2006