
User Guide | VersaLink™ Gateway (Model 327W) | |
|
|
|
| RIP Enable | Factory Default = DISABLED |
|
| If this box is checked, RIP will be Enabled (turned ON). |
|
| RIP Configuration |
| Interface Type | LAN: Select this if you are configuring RIP for the LAN side. |
| WAN: Select this if you are configuring RIP for the WAN side. (WAN side is | |
|
| receive only.) |
| Receive | The version of RIP to be accepted. |
|
| Possible responses are: |
|
| None |
|
| RIPv1 |
|
| RIPv2 |
|
| RIPv1 or RIPv2 |
| Transmit | The version of RIP to be transmitted. (WAN side RIP never transmits) |
|
| Possible responses are: |
|
| None |
|
| RIPv1 |
|
| RIPv1 Compatible |
|
| RIPv2 |
| RIPv2 Authentication Mode | If using RIP V2, you must select the type of authentication to use. |
|
| Possible responses are: |
|
| None |
|
| Clear Text |
|
| MD5 (If MD5 authentication, the password) |
|
| Advanced |
| Default VersaLink | Factory Default = DISABLED |
|
| If this box is check (Enabled), this feature will determine whether the modem |
|
| advertises itself as a VersaLink (i.e., the default route) |
| Border VersaLink Filtering | Factory Default = ENABLED |
|
| If this box is unchecked (Disabled), the modem will not summarize subnets into |
|
| a single route before advertising. |
| RIP Timer Rate | Indicates how often to update the local routing table. |
| RIP Supply Interval | Indicates how often to advertise routes to neighbors. |
| RIP Expire Time | Indicates how long routes received from neighbors become invalid, if no refresh |
|
| of the route is received. |
| RIP Garbage Collection Time | Indicates how long to advertise invalid routes after they have expired. |
If you change any settings in the RIP Configuration screen and clicke on save, the following screen will be displayed. Click on OK to save your new RIP settings.
114 | October 2006 |