Westell Technologies 327W manual Enabling Static NAT

User Guide VersaLink™ Gateway (Model 327W)

13.6 Enabling Static NAT

Before you enable static NAT, you must select Default from the Current Profile drop-down box. Static NAT must be configured for the Gateway’s default account profile. After you select the default profile, click the static NAT button.

NOTE: In the following screen, the default account profile is labeled Default. However, if you have renamed the default account profile, you must select the profile name you created as the default profile.

If you click on the static NAT button in the Service Configuration screen, the following screen will be displayed. Select your device from the Static NAT Device drop-down arrow, or type the IP address of the device in the field labeled IP Address. Click on enable. This will automatically enable the Static NAT feature for that device.

030-300500 Rev. A 120 October 2006