User Guide | VersaLink™ Gateway (Model 327W) |
15.4 Wireless Statistics
The following settings will be displayed if you select Wireless from the Statistics menu.
| Wireless Card Information |
Network Name (SSID) | This string, (32 characters or less) is the name associated with the Access |
| Point (AP). To connect to the AP, the Service Set ID (SSID) on a Station |
| card must match the SSID on the AP. |
802.11 MAC Address (BSSID) | This is the Media Access Controller address of the AP. It is used as the Basic |
| Service Set Identifier (BSSID). |
FW Version | This is the Network Interface Card Identifier. It uniquely identifies the |
| hardware platform of the AP. This is used with other information to |
| determine if the inserted card can be used as an AP, and if so, the version of |
| AP firmware to be used. Not all makes of wireless station cards can be used |
| as an AP. |
| Communication Statistics |
NOTE: Data preceded by OUT pertain to transmissions from the VersaLink to a station; VersaLink is the source. Data preceded by IN pertain to data received by VersaLink; VersaLink is the destination.
|
| The number of successfully transmitted frames whose destination address |
| |
|
| was a single station; not necessarily the same station, but to any single |
| |
|
| station as opposed to a transmission that multiple stations would |
| |
|
| in the case of broadcast message. |
|
|
|
|
|
|
|
| 142 | October 2006 |
|