User Guide | VersaLink™ Gateway (Model 327W) | |
|
|
|
|
| Host not found: The DNS Server was unable to find an address for the given |
|
| host name. |
|
| No data, enter host name: No host name is specified. |
|
| Could not test: The test could not be executed due to VersaLink settings. Check |
|
| your DSL sync or your PPP session. You must have both a DSL sync and a PPP |
|
| connection established to execute a PING. |
| IP Address | IP Address of the Host Name. |
| PING | Performs an IP connectivity check to a remote computer either within or beyond |
| (via IP Address or Host Name) | the Service Provider’s network. You can PING a remote computer via the IP |
|
| address or the DNS address. If your PING fails, try a different IP or DNS |
|
| address. |
|
| Possible responses are: |
|
| Success: The Remote Host computer was detected. |
|
| No Response: There was no response to the Ping from the remote computer. |
|
| No name or address to PING: No host name or IP address was specified. |
|
| Could not test: The test could not be executed due to VersaLink settings. Check |
|
| your DSL sync or your PPP session. You must have both a DSL sync and a PPP |
|
| connection established to execute a PING. |
| Trace | Determines the route taken to destination by sending Internet Control Message |
|
| Protocol (ICMP) echo packets with varying IP |
|
| the destination. Trace Route is used to determine where the packet is stopped on |
|
| the network. |
15.2 Diagnostic Logs
If you select Diagnostic Log, from the System Self Test menu, the following screen will be displayed.
135 | October 2006 |
