User Guide | VersaLink™ Gateway (Model 327W) |
12.2.4 Adding NAT Services to a Profile
This section explains how to add NAT services to your NAT service profile. Remember, you may attach an unlimited number of NAT services to any profile.
NOTE: Westell has developed an extensive list of NAT services and you may select any service from this list. By selecting your specific NAT service and setting up a NAT profile, you will ensure that the appropriate ports on VersaLink are open and that the required application traffic can pass through your LAN. For a list of supported NAT services, go to section 16 (NAT Services).
To add a NAT service, select Services from the Configuration menu. Next, Select a NAT service from the options provided at the Service Name
NOTE: You can attach multiple NAT services to your profile. However, for each NAT service that you attach to your profile, you must first select the new NAT service. Then, you must load the new NAT Configuration, as explained in section 12.2.2.
In the following screen, the ‘Default’ profile has been selected as the profile that will host the selected NAT service. However, you can attach a NAT service to any profile.
52 | October 2006 |
