User Guide | VersaLink™ Gateway (Model 327W) | |
|
|
|
|
| Possible responses are: |
|
| Best Effort (BE) |
|
| Assured Forwarding (AF1) |
|
| Assured Forwarding (AF2) |
|
| Assured Forwarding (AF3) |
|
| Assured Forwarding (AF4) |
|
| Expedited Forwarding (EF) |
|
| Network Control (NC) |
| Peak Information Rte (%) | The maximum allowed rate for this priority, expressed as a percentage of |
|
| the DSL rate. |
| Committed Information Rate (%) | The committed rate for this priority, expressed as a percentage of the DSL |
|
| rate. |
| Peak Burst Size | The interval in milliseconds for averaging the peak offered rate. |
| Committed Burst Size | The interval in milliseconds for averaging the committed offered rate. |
| Max Queue Size | The number of packets that can be queued for this priority. |
|
| Latency Measurements |
| Latency Boundary | This configures the maximum latency boundary in milliseconds that a |
|
| specific packet may be delayed by. |
| Latency Threshold (ms) | This setting configures the maximum latency boundary in milliseconds that |
|
| a specific packet may be delayed by. |
|
| Possible responses are: |
|
| Boundary 1:0 ms |
|
| Boundary 2:10 ms |
|
| Boundary 3:30 ms |
|
| Boundary 4:40 ms |
|
| Boundary 5:100 ms |
|
| Boundary 6:1000 ms |
|
| Boundary 7:3000 ms |
|
|
|
| IP Fragmentation Enable | Factory Default = DISABLED |
|
| If this box is checked, IP Fragmentation will be Enabled. If Enabled and |
|
| packets larger than 1500 bytes total are received, they will be fragmented. |
| IP Fragment Size | This is the IP Packet Size. |
|
| Possible responses are: |
|
| 100, 148, 244, 292, 340, 388, or 436 |
If you made changes to the QOS Configuration and clicked on save, the following screen will be displayed. Click on OK. This will save your new QOS settings.
110 | October 2006 |
