
User Guide | VersaLink™ Gateway (Model 327W) |
12.5.7 VLAN
The following settings will be displayed if you select VLAN from the Advanced LAN menu.
VLAN Enable | Factory Default = DISABLED |
| If this box is check, VLAN will be Enabled. This will allow VLAN |
| tagging to occur according to the data port’s configuration. |
LAN Port | This allows you to select the LAN port that you wish to configure. |
| Possible responses are: |
| Ethernet Port 1 |
| Ethernet Port 2 |
| Ethernet Port 3 |
| Ethernet Port 4 |
| WLAN Port |
VLAN ID | This allows you to assign a VLAN ID to the port. |
| Possible responses are: |
| 1 through 8 |
VLAN Priority | This allows you to set the VLAN priority for the port. |
| Possible responses are: |
| 0 through 7 |
Outgoing VLAN Tag | This allows you to keep or remove the VLAN tag on the port when data is |
| outgoing. |
83 | October 2006 |