User Guide | VersaLink™ Gateway (Model 327W) |
12.6.3 Editing the WAN Configuration
The following VC 1 Configuration screen will be displayed if you click on the edit button adjacent to any of the ‘Enabled’ protocols displayed in the WAN Configuration screen. (NOTE: The Protocol must be enabled before you can edit its VC configuration.) The VC 1 Configuration screen allows you to edit your virtual connection (VC). A virtual connection identifies a connection through the service provider’s ATM network to your ISP. Unlike physical hardware connections, virtual connections are defined by data.
If you change any of the VC settings in the following screen, click on the Set VC button.
NOTE: If you experience any problems, please reset VersaLink via the external hardware reset button or via the procedure defined under the Maintenance menu in section 14.1. The actual information displayed in this screen may vary, depending on network connection established.
92 | October 2006 |
