Wire World Of America 1800 manual Check your connections

8.Verify that Ethernet Adaptor (en1) is selected in the Show field. If it is not, select it from the pull-down menu. When the New Port Detected message displays, click OK.

9.Click Save to complete your installation.

Note: Your Macintosh computer automatically assigns the name “(en1)” to the Intelligent Gateway USB port. If your computer has more than one Ethernet-type network device installed, the USB port may be named “(en2)” or higher.

Check your connections

Power-on your computer. When your computer is fully powered-up, verify the POWER and LOCAL NETWORK indicator lights on the front of the Intelligent Gateway are green. If they are not, see “Diagnosing connection problems” on page 110. The BROADBAND LINK indicator light will not turn green

until the Intelligent Gateway software has been installed and an Internet connection has been established.

Continue from here to Step 3 “Install the Intelligent Gateway Software” on page 12.

11