Wire World Of America 1800 manual Install the Intelligent Gateway USB driver Macintosh

Install the Intelligent Gateway USB driver — Macintosh

Before installing your Intelligent Gateway software, you must install the Intelligent Gateway USB driver on your computer. The following screens show the installation under Macintosh OS 10.2 and may vary somewhat on Macintosh OS 8.6 to 9.X.

1.Power on your computer.

2.Insert the Intelligent Gateway Setup Wizard CD in your computer’s CD-ROM drive.

3.Double-click the 2Wire USB folder to install the driver.

4.If you have set up an administrator name and password, the Authenticate screen opens. Enter your administrator name and password and click OK.

5.Follow the on-screen instructions. When the driver installation is complete, you will be prompted to restart your computer.

6.After your computer restarts, connect a USB cable from your Macintosh computer to the Intelligent Gateway USB port.

7.Establish your connection. Open the network Control Panel and select the

Apple icon>System Preferences...>Network.

10