Xerox 421 manual Bypass Tray, Optional Additional Memory

￿

Switch off the power and disconnect the power cord

￿from the outlet.

Locate the Memory Card slot cover at the rear of the

￿machine and open the cover.

Remove any protective packaging from the memory cards and slide each card into a Memory Card slot.

Close the Memory Card slot

￿cover.

Reconnect the power cord and switch on the machine.

Bypass Tray

The Bypass Tray is for loading special paper, transparencies, labels and cardstock. There is an extension tray that can be pulled out to enable larger size paper to be fed.

HINT: Refer to Appendix B - Specifications for more information about approved media.

Optional Additional Memory

Two extra memory cards are available with 64mb on each. There is a door on the back of the machine that provides access to the memory card slots.

Use the following procedure to insert additional memory cards into the memory slots:

CAUTION: Switch off the power and disconnect the power cord from the outlet prior to installing additional memory. These components may be susceptible to Electro-Static Discharge (ESD). Observe all ESD procedures to avoid damage.

Memory cards are inserted into these slots

Memory Card slots cover

2-10 WorkCentre Pro 421 User Guide