Xerox 421 manual Scanning into memory, 5x11, Scanning 001, Scan next End build job

If the original is not a standard size the machine may not be able to detect the size automatically and the “Select

￿original size” screen displays.

If required, use the scroll key

to select the original size and press [Start].

Select original size

8.5x11”

A4

A5

1

￿This message will appear when the first page or section of the document is being

￿scanned.

When the first page or section of the document has finished scanning remove the original(s).

NOTE: If more than one set of each section has been selected, depending on the features programmed, the machine will copy just one set of each section. At the end of the job the remaining sets will be copied.

Scanning into memory		1
Scanning page	:001

￿Load the next page/section.

Use the scroll key to select [Change current settings] if necessary and press [Enter].

Build Job

Scan next page

End build job

Change current settings

1

3-28 WorkCentre Pro 421 User Guide