Loading the Bypass Tray

The Bypass Tray can be used for a variety of different media.

It is located on the right side of the machine.

To change the paper size for the Bypass Tray, it must be selected from the Control Panel.

Load the media in the Bypass

￿tray.

Slide the guide until it is just touching the edge of the stack.

NOTE: Ensure that the maximum fill line is not exceeded.

NOTE: The Bypass tray is extendable to accommodate short edge feed sheets or larger paper sizes.

5-30

WorkCentre Pro 421 User Guide

Page 142
Image 142
Xerox 421 manual Loading the Bypass Tray