Use the scroll key to select the setting you wish to change and press [Enter].
Select the changes required and press [Enter].
The [Setting] screen is
displayed again. Use the
scroll key to select
[Done] and press [Enter].
Repeat the steps above for each section of the job.
After the last page/section
has been scanned, use the
scroll key to select [End
build job] and press [Enter].
Enter the quantity required and press [Start].
The machine will complete the quantity selected.
Setting
Done
| Lighten/Darken | : Auto |
| ||
| Edge Erase | : Off |
Build Job
Scan next page
End build job
Change current settings
1 |
1 |
Copy
WorkCentre Pro 421 User Guide |