¾Select [Next Destination]. The number appears in the list.

¾Repeat steps 3 and 4 until all the numbers have been entered.

¾Select [Save].

Fax

NOTE: If entering more than 50 numbers, the message Input limit exceeded is displayed and the additional numbers are ignored.

HINT: To cancel the job and all selected destinations, select Stop.

¾Select the character required.

¾Select [Add].

¾Repeat the above steps for each character.

¾Select [Enter] to exit.

Dialing Characters

Dialing characters are special characters that are used for entering fax numbers. Some characters are used only when auto dialing, such as:, !, /, - and =. Dialing characters are entered as part of the fax number. As Dial Pause [-] is so commonly used, it is available as a button on the control panel and also in the list of Dialing Characters.

Depending on the setup of the telephone and communication lines, some or all of the following characters will need to be used.

Xerox Document Centre 440/432/430/426/425/420 User Guide

Page 4-11

Page 127
Image 127
Xerox 432, 440, 430, 426, 425, 420 manual Dialing Characters, ¾ Select Next Destination. The number appears in the list