Paper Tray Setups

¾Select [Paper Trays].

¾Select any button to change the setting - a description of each follows.

¾Make changes as required.

¾Select [Save].

Default Tray Select the scroll buttons to select the paper supply default setting - the list contains only the paper trays available with the machine configuration. The chosen setting will be displayed prior to other selections made by the user.

If Auto is selected as the default setting, the paper tray is selected automatically to match the size and orientation of the originals.

Tray Priority Select the order in which the machine searches the trays for available media.

To change the settings, assign a priority to each tray. Number 1 is the highest priority and, depending on how many trays are available, 4, 5, or 6 will represent the lowest priority, Each number can only be assigned once.

NOTE: This feature is not available on single tray configurations.

Auto Tray Switching Use the scroll buttons to select or de-select this feature. On sets the machine to automatically switch to another paper tray when the selected tray is out of paper. Another tray must contain paper of the same size, type and orientation for automatic switching to occur. To de-select this feature, select Off.

Page 11-8

Xerox Document Centre 440/432/430/426/425/420 User Guide

Page 304
Image 304
Xerox 425, 440, 432, 430, 426, 420 manual Paper Tray Setups, ¾ Select Paper Trays