Copying procedure

Quick Pathway

¾Load documents.

¾Press [Features].

¾If necessary select [Copy].

¾Select the Copy features required.

Before making copies on the DC440/432/430/426/425/420, identify what is to be copied and the number of copies required. Use the following steps to make a copy using the Document Centre.

NOTE: If the Auditron has been enabled on the machine, an account number may be required before programming can commence. For account allocation, or further information about the Auditron, please contact the Key Operator.

HINT: When programming a copy job on a network connected machine, select Job Interrupt first. The Document Centre will not complete any network jobs allowing the copy job to be programmed and completed without interruption. Refer to “Job Interrupt” on page 2-25 for more information.

1. Load the documents

A choice of document input areas is available. These are:

-A document feeder for single or multiple documents

-A document glass for single documents or bound originals.

NOTE: A document glass cover will be fitted on the DC425 cabinet configuration.

Document Feeder

Up to 50 documents can be scanned at one time using the document feeder. Ensure the documents are of the same size, in good condition and all staples or paper clips removed.

Page 3-2

Xerox Document Centre 440/432/430/426/425/420 User Guide

Page 62
Image 62
Xerox 430, 440, 432, 426, 425, 420 manual Copying procedure, Load the documents, Document Feeder