Jams in the stapler

¾ Remove the staple cartridge from the

Solving

Symptom

Recommendation

 

 

 

 

 

stapler and check the position of the first

Problem

 

staple is not in this position or appears

 

staple. The staple should be lying flat

 

 

against the metal striking plate. If the

 

 

damaged, manually remove the staple.

 

 

Refit the staple cartridge and try again, if

 

 

the problem persists replace the staple

 

 

cartridge.

 

 

 

 

Paper jams

¾ Check to see if the paper is loaded

 

 

correctly. Flip the paper over in the paper

 

 

tray.

 

 

¾ Check to see if the paper tray guides are

 

 

locked into position.

 

 

¾ Do not use media that is torn, wrinkled,

 

 

or folded.

 

 

¾ Load fresh paper.

 

 

 

 

Paper curls

¾ Check to see if the paper is loaded

 

 

correctly. Load paper in Paper Trays 1,

 

 

2, 3 and 4 seam side up.

 

 

¾ Load paper in the High Capacity Feeder

 

 

and Bypass Tray seam side down.

 

 

¾ Load non-standard media in the Bypass

 

 

Tray.

 

 

¾ Refer to “Paper and other media” on

 

 

page 10-1for procedures.

 

 

 

 

Envelope Jams

¾ Turn the envelopes so that the gummed

 

 

edge is the trail edge.

 

 

 

 

With an external control device connected

¾ Check the external control device to

 

(such as a coin-operated device), the

ensure that it is properly connected and

 

machine displays a Ready to copy

powered on.

 

message, but users cannot log in

 

 

 

 

 

Xerox Document Centre 440/432/430/426/425/420 User Guide

Page 13-13

Page 425
Image 425
Xerox 420, 440, 432, 430, 426, 425 manual ¾ Refer to Paper and other media on