Network Scanning

Quick Pathway

¾Select [Features] on the control panel.

¾if necessary select [All Services].

¾Select [Network Scanning].

¾Select the Template required.

Network Scanning enables the creation of an electronic image file by scanning an original document. The image file is placed into a network filing location specified in a Template. A template stores the user’s preferred network scanning options.

NOTE: Typical network scanning options include the filing destination of the image file, whether the document should be scanned lighter or darker or if the document was double- sided.

When a template is selected at the Document Centre the stored scanning setups are loaded. If a document is scanned using this template then the image file created will be processed according to the settings configured in the template.

The settings programmed for the selected template can be temporarily amended using the features available on the touch screen.

The Network Scanning screen displays the templates available to the machine as a list of template names.

The default template @default is always present on the machine and is displayed at the top of the template list. The Network Scanning screen also displays a summary of the setups stored within the selected template, for example, information on the filing location of the scanned image file.

For more information about the other features available refer to the following:

Image Adjustment - page 6-7

Output Formats - page 6-14

Authentication Mode - page 6-22

NOTE: The Scan to Email option is not available on the DC426/420. The following screen will only be displayed on the DC440/432/430/425.

Page 6-2

Xerox Document Centre 440/432/430/426/425/420 User Guide

Page 190
Image 190
Xerox 425, 440, 432, 430, 426, 420 manual Network Scanning