¾Before placing the documents into the document feeder, remove all staples and paper clips.

¾Insert the documents neatly into the document feeder, face up. The first page should be on top with the headings towards the back or left of the machine.

¾Align the stack with the left and rear edges of the document feeder tray and position the guide to just touch the edge of the documents.

¾Check the green light on the top rear of the document feeder. When the documents are positioned correctly, it will light up.

Light

Document Feeder Guide

When Auto paper is selected, the document feeder senses the size and orientation of the documents, then checks the paper trays to find one that corresponds. The size and orientation are displayed in the message area in the upper left hand corner of the touch screen.

NOTE: This applies when paper supply is set to Auto and used with standard document sizes. For non-standard sizes, manually select the paper tray required.

Document Glass

The document glass should be used for single pages or bound originals up to a maximum of 11” x 17” size.

Page 3-4

Xerox Document Centre 440/432/430/426/425/420 User Guide

Page 64
Image 64
Xerox 425, 440, 432, 430, 426, 420 manual Document Glass