Xerox 420, 426 manual Communication Mode DC440/432/430/425

Models: 430 425 420 440 432 426

1 466
Download 466 pages 36.26 Kb
Page 137
Image 137

Communication Mode (DC440/432/430/425)

On the DC440/432/430/425 this feature allows selection of the communication mode used for transmission to a remote fax machine.

NOTE: On the DC426/420 the Forced 4800 bps feature is the only available option.

¾Load the document.

¾Select [More Features].

¾Select [Communications Mode].

¾Select the required option.

¾Select [Save] and then [Start].

The following options are available:

Fax

Super G3 determines the communication mode to be used based on the maximum capabilities of the remote fax machine. This mode minimizes data transmission errors by using Error Correction Mode (ECM). Initial communication speed will be 33,600 Bits Per Second (bps).

G3 selects the communication mode based on the maximum capabilities of the remote fax machine. Initial communication speed will be 14,400 bps. ECM is also used with this option.

Forced 4800 bps used in areas of low-quality communication, or when experiencing telephone noise, or when fax communications are susceptible to errors. To minimize errors, set the DC440/ 432/430/426/425/420 to run at a communication mode of 4800. This mode is slower, but it is less susceptible to errors.

In some regional areas, the use of the Communication Mode/ Forced 4800 bps feature is restricted.

Xerox Document Centre 440/432/430/426/425/420 User Guide

Page 4-21

Page 137
Image 137
Xerox 420, 426 manual Communication Mode DC440/432/430/425, ¾ Select More Features ¾ Select Communications Mode